Soundstream AR1-5000D 1 Channel Arachnid Series 5000W Monoblock Class D Car Stereo Amplifier

Soundstream AR1-5000D

Arachnid Amplifiers are the next step in amplifier fundamentals. Monoblock models take every advantage afforded by Class D switching amplifier technology, a compromise of power and efficiency. Each monoblock can power a paralleled pair of 2-ohm subwoofers, or a single 1-ohm load. A bridged/strapped pair of Arachind Monoblock combine their 1-ohm strength to a 2-ohm load. Regardless of the configuration, Arachnid amplifiers pave the road of reliability and longevity you expect from Soundstream. 1-OHM MINIMUM IMPEDANCE STABILITY An amplifiers impedance stability is its ability to continuously power speaker(s) of no less than the given impedance per channel, without the risk of damage. Subwoofers are available in a variety of voice coil configurations and impedances, so be sure yours will be no less than 1-ohm. LOW LEVEL RCA INPUT & PRE-AMP OUTPUT Connect the low level (pre-amp) audio output of the car stereo to the amplifier, using good quality twisted pair RCA interconnect cables. The amplifiers pre-amp output daisy-chains the audio signal to multiple amplifiers of complex audio systems. ACTIVE 12dB/OCTAVE CROSSOVERS & PHASE SHIFT Active crossovers built into an amplifier are the most efficient type of crossovers to use in car audio systems. Active crossovers protect speakers from damage by harmful frequencies, and preserve optimum performance. MILITARY GRADE FR-4 PCB W/ MOSFET POWER SUPPLY FR-4 circuit board substrate is a woven fiberglass cloth impregnated with an epoxy resin, providing good electrical insulation properties and heat resistance exceeding 260OF. MOSFET power supply is the stable & efficient conversion of a vehicles Direct Current (DC) power to Alternating Current (AC) power for speakers. DASH MOUNT CONTROL Dash mountable control is included with this amplifier can be mounted anywhere in the vehicle, but near the driver seat is recommended. The gain level of the Arachnid monoblock can be adjusted on-the-fly to accommodate various music styles & your listening preference. DIRECT SHORT, THERMAL, & OVERLOAD PROTECTION Conventional amplifier circuitry include a self-preservation mode, which temporarily shuts down the amplifier, protecting it from stress and risk of damage. Protection triggers include speaker output direct short, speaker impedance less than the amplifiers stability, or other unknown conditions causing the amplifier internal temperature to rise to unsafe levels.

Features:

• 5000W Monoblock Class D Arachnid Series Car Amplifier with Bass Remote
• Hybrid Aluminum Alloy Heatsink for Optimum Dissipation
• MOSFET Power Supply w/ Audiophile Grade IRTM Transistors
• Military Grade SMT PCB Maintains Dynamic Performance
• Direct Short, Thermal, & Overload Circuits Protect Amplifier
• 200mV-6V Low Level/RCA Input w/ Bridged Operation Outputs
• Barrier Strip Wire Terminals, 4g Power & 8g Speaker Outputs
• Variable 12dB High Pass, Low Pass, & Subsonic Crossovers
• 12dB Bass Boost Increases Low Octave Harmonics
• Dash Mount Gain Control Module Included

Specifications

• 1 Channel Arachnid Series Monoblock Class D Car Stereo Amplifier
• Power Rating:
  • Max Power : 5,000 Watts
  • RMS Power (@ 4Ω) : 500W x 1 Channel
  • RMS Power (@ 2Ω) : 900W x 1 Channel
  • RMS Power (@ 1Ω) : 1500W x 1 Channel
• Low Pass Crossover : 32 - 300Hz 12dB/Octave
• Subsonic Crossover : 10 - 50Hz 12dB/Octave
• Variable Phase Shift : 0 - 180°
• Total Harmonic Distortion : <0.3%
• Frequency Response : 15Hz - 500Hz
• Signal-to-Noise Ratio : 105dB
• Input Sensitivity : 200mV - 6V
• Dimensions (8.75"W x 2.25" H) : 13.50"